Caddie Contact us
All free tools

Free tool · Scale converter

Will your plan fit on the sheet?

Pick a scale and turn a length on the drawing into the real size, or the other way round. See which A-size sheet your plan fits, and draw a scale bar to go with it.

  • Nothing leaves your phone
  • Saved on this device only

How to use

  1. Pick your drawing scale, or choose Custom and type your own.
  2. Key in a length you measured on the drawing, or a real length, and read the other side.
  3. Enter the real width and depth of your plan and your sheet margin. See which sheets it fits, and at what scale.

Your drawing

Scale
From the drawing to real size

From real size to the drawing

Will it fit?

Runs across the sheet.

Runs up the sheet.

A starting value. Set your own, title block included.

Sheets and scale bar

Enter the real width and depth of your plan to see which sheets it fits. Or press Sample data to see an example.

Scale bar

How we work it out: real size is the drawing length times the scale number, so 10 mm at 1:50 is 500 mm. Drawing length is the real length divided by the scale number. Feet and inches use 1 inch = 25.4 mm, rounded to the nearest inch.

Sheet sizes: ISO 216 A series, A4 210 × 297 mm, A3 297 × 420 mm, A2 420 × 594 mm, A1 594 × 841 mm, A0 841 × 1189 mm. Source: ISO 216:2007.

Rather we drew it?

We draw the space and plan the fit-out.

We draw your space with the furniture in, as options you can compare side by side. And we plan your fit-out timeline: the phases, the crews, the inspections and the handover. A reply from a real person, not a bot.

WhatsApp us